Standing seam · Value tier
Defender NS100 — Nail-Fin Snap-Lock Standing Seam Panel
A clean standing seam roof at a price that wins the bid. Snaps over a nail fin, fabricated to your length in-house, code-approved for Florida.
The Defender NS100 is a nail-fin snap-lock standing seam metal roof panel fabricated to order by Superb Metals in Minneola/Clermont, Florida. It's the budget-tier system — 26ga coated steel or .032 aluminum, HVHZ-approved — built for residential and light-commercial roofs that need a clean standing seam on a sharp number.
The Defender is the panel you reach for when the job needs a real standing seam look and a number that closes. No clips, no field seamer — it snaps together fast over a nailed fin, so your crew moves. We roll it to your length here in Clermont, color matched to the trim, quoted in hours.
Defender NS100 specifications
- System
- Nail-fin snap-lock standing seam
- Profile
- 1 inch rib, snap-together
- Rib height
- [TODO: Confirm rib height]
- Attachment
- Nail fin (face-fastened fin, concealed)
- Metals
- 26 ga AZ50 coated steel · .032 al
- Panel width
- Custom — fabricated to job
- Coverage widths
- [TODO: Confirm coverage widths]
- Panel length
- Rolled to order
- Max length
- [TODO: Propose 21 ft max length]
- Finishes
- Kynar/PVDF · SMP · Galvalume
- Wind rating
- HVHZ-approved
- Uplift rating
- [TODO: Uplift rating]
- Approvals
- HVHZ; Florida Product Approval
- FPA / NOA #
- [TODO: FPA / NOA number]
- Warranty
- [TODO: Per finish]
- Lead time
- Committed fab date on every order
- Quote turnaround
- [TODO: Quote turnaround (hrs)]
Panel profile
Gauge & substrate options
Finishes
Approvals & wind
Warranty & lead time
Speed on the deck
Built to move fast on the deck.
The nail fin lets your crew set and snap without a mechanical seamer on the roof. Fewer steps, faster dry-in, lower labor on the panel itself.
That's where the Defender earns its tier — it's the standing seam look without the standing seam clock.
- Snap-lock, no field seamer
- Faster dry-in
Substrate
Steel or aluminum, your call.
Run 26ga AZ50 coated steel inland to hold the price, or .032 aluminum near the coast where salt eats steel.
Either way it comes off our run in your finish, matched to the trim, so the roof reads as one job.
- 26ga AZ50 steel
- .032 aluminum
The Defender advantage
A budget panel that doesn't act like one
“Cheap panels mean a sloppy supplier and a late truck.”
Same shop, same fab discipline as the Guardian. Budget tier on the panel, not on how we run your order.
In-house fab · committed date
“Will it pass inspection in Florida?”
HVHZ-approved. We publish the FPA number so your AHJ has it before they ask.
HVHZ-approved · FPA published
“The trim won't match the panel.”
Order trim with the panels — one run, one color. We fabricate both in-house.
Panel + trim · one run
Defender NS100 on real Central Florida roofs
Galvalume snap-lock re-roof · Lake County, FL
Defender NS100 · Galvalume
Galvalume accent roof · Orange County, FL
Defender NS100 · GalvalumeLight-commercial standing seam · Central FL
Defender NS100 · steel
Need more than budget tier? Compare to the Guardian SL150
| Specification | Defender NS100 You're viewing this | Guardian SL150PREMIUM View the Guardian SL150 |
|---|---|---|
| Attachment | Nail-fin snap-lock | Clip, mechanically seamed |
| Wind | HVHZ-approved | 325+ MPH tested, exceeds Miami-Dade |
| Warranty | Per finish | Up to 50-yr transferable |
| Best for | Residential / value re-roofs | HVHZ, coastal, architectural |
- Attachment
- Nail-fin snap-lock
- Wind
- HVHZ-approved
- Warranty
- Per finish
- Best for
- Residential / value re-roofs
- Attachment
- Clip, mechanically seamed
- Wind
- 325+ MPH tested, exceeds Miami-Dade
- Warranty
- Up to 50-yr transferable
- Best for
- HVHZ, coastal, architectural
FAQ
Defender NS100 — questions, answered
What is the Defender NS100 panel?
The Defender NS100 is a nail-fin snap-lock standing seam metal roof panel fabricated to order by Superb Metals in Clermont, Florida. It's the budget-tier system — 26ga coated steel or .032 aluminum, HVHZ-approved — for residential and light-commercial roofs that want a clean standing seam at a competitive price.
How is the NS100 different from a clip-fastened panel like the SL150?
The NS100 attaches over a nailed fin and snaps together, so it sets fast without a mechanical seamer. The Guardian SL150 uses concealed clips and is field-seamed, which is what lets it hit 325+ MPH and exceed Miami-Dade. The NS100 trades that top-end wind performance for speed and a lower price.
What metals and finishes does the NS100 come in?
We roll the NS100 in 26ga AZ50 coated steel and .032 aluminum, with Kynar/PVDF, SMP and Galvalume finishes. Aluminum is the typical choice near the coast; steel and Galvalume hold the price inland.
Is the NS100 approved for use in Florida?
Yes — the NS100 is HVHZ-approved. We publish the Florida Product Approval number so your building department has it up front. [TODO-CLIENT: FPA/NOA number]
Send the takeoff. Get an NS100 number today.
We'll read it, flag anything missing before production, and quote it fast.