Aluminum fabrication · .032 coil · Clermont, FL
Aluminum Fabrication — Cut to Spec in Central Florida
The corrosion-proof metal for Florida roofs, fabricated here, not freighted in. .032 aluminum panels, trim, drip edge and flashing — color-matched and on your truck fast. Superb Metals is an aluminum fabricator in Clermont/Minneola, supplying roofing contractors and GCs across the Orlando metro.
Superb Metals is an aluminum fabricator in Clermont/Minneola, Florida, supplying roofing contractors and GCs across the Orlando metro. We fabricate .032 aluminum into standing seam panels, trim, drip edge, coping and flashing — cut to your spec and color-matched from one run. Aluminum is the corrosion-proof pick for Florida salt air and humidity. Will-call or jobsite delivery; quote at (352) 432-3047.
Aluminum coil — the Florida workhorse gauge
Not days, to a quote on an aluminum run· TBC
One color run, so trim matches your panels
Central Florida counties served — Lake · Orange · Seminole · Osceola · Polk
In Florida, the metal either survives the salt air or it becomes your callback.
Corrosion-proof · near you
In Florida, the metal either survives the salt air or it becomes your callback.
Aluminum buyers fear corrosion callbacks and out-of-area lead times. Here's how we kill each one.
“Used coated steel near the water and it's streaking after one season. The homeowner thinks the whole roof's failing.”
For coastal and high-humidity jobs we fabricate .032 aluminum — it doesn't rust. The roof that survives the salt air is the one that doesn't generate the callback.
.032 aluminum · doesn't rust
“Searched 'aluminum fab shops near me' and the only result was three hours away with a two-week lead.”
We're the aluminum fab shop in Central Florida — Minneola, off the 27. Will-call pickup or jobsite delivery, fabricated here, not freighted from out of state.
In Minneola · will-call or delivery
“Aluminum trim came from a different supplier than the panels and the whites didn't match.”
We run your aluminum panels and trim from the same coil and color run. One white, one gauge, one piece on the roof.
One coil · one color run
Florida-grade
Why aluminum, in Florida
Florida is the corrosion test no metal asks for. Salt air, humidity, and standing-water seasons eat through metals that aren't built for it. Aluminum doesn't rust — it forms its own oxide layer and holds.
That's why .032 aluminum is the default substrate for coastal and high-humidity roofs here, from panels to the edge metal at the eave. It costs a little more than coated steel, and it saves you the corrosion callback that costs a lot more.
- Doesn't rust — forms a protective oxide layer
- The default substrate for coastal and high-humidity Florida roofs
- .032 gauge — the standard for panels, trim and flashing
- Lighter than steel, easy to form clean bends
What we fabricate in aluminum
Whatever the roof needs, we fabricate it in .032 aluminum: standing seam panels (NS100 and SL150), drip edge and edge metal, coping and parapet caps, scuppers, and custom flashing.
Order the panels and the trim together and it all comes off one coil, in one color run — so the aluminum reads as one roof, not a panel order and a separate trim order that almost match.
- Standing seam panels — NS100 and SL150
- Drip edge, gutter apron and rake / edge metal
- Coping and parapet caps (+ radius)
- Scuppers and custom flashing
- Panels + trim from one coil and color run
Finishes
Kynar/PVDF and SMP finishes on aluminum
We finish aluminum in Kynar 500/PVDF — the architect's first choice for fade and chalk resistance — and in SMP for value jobs. Pick a color off the chart and we match the whole run to it.
Aluminum plus a Kynar finish is the long-life, low-maintenance combination that holds its color through Florida sun while the substrate shrugs off the salt air.
Aluminum — what we carry and cut
- Gauge
- .032 aluminum (standard)
- Other gauges
- [TODO: Other gauges if stocked]
- Products
- Standing seam panels (NS100 · SL150) · drip edge · coping · scuppers · flashing
- Finishes
- Kynar/PVDF · SMP
- Mill finish
- [TODO: Mill finish if offered]
- Best for
- Coastal & high-humidity Florida roofs — corrosion resistance
- Match
- Panels + trim from one coil & color run
- How to buy
- Will-call from Minneola or jobsite delivery · (352) 432-3047 · orders@SuperbMetals.com
How to order
Aluminum, in and out
Tell us the job
Panels, trim, or both; the color; the lengths. Coastal? We'll confirm aluminum is the right call.
Quote in hours
Priced fast, matched across panels and trim.
Fabricated in-house
One coil, one run, cut to your length.
Pickup or delivery
Will-call from Minneola or to your Central Florida jobsite.
- Central Florida aluminum fab shop
- .032 coil
- In-house fabrication
- Corrosion-proof for salt air
- Single-run color & gauge match
- Kynar/PVDF
- 5.0★ from 6 Google reviews
- Will-call & delivery
FAQ
Aluminum fabrication FAQ
Is there an aluminum fab shop near Orlando / Central Florida?
Yes — Superb Metals is an aluminum fabricator in Clermont/Minneola, Florida, off Highway 27 in Lake County. We fabricate .032 aluminum panels, trim, drip edge and flashing for roofing contractors and GCs across Lake, Orange, Seminole, Osceola and Polk counties, with will-call pickup or jobsite delivery.
Why use aluminum on a Florida roof?
Aluminum doesn't rust. In Florida's salt air and humidity it forms a protective oxide layer and holds, where coated steel can streak and corrode near the coast. That's why .032 aluminum is the default substrate for coastal and high-humidity roofs — it avoids the corrosion callback that costs far more than the metal.
What gauge aluminum do you fabricate?
We fabricate .032 aluminum as the standard gauge for panels, trim, drip edge, coping and flashing. It's the right balance of strength, formability and corrosion resistance for Florida roofing. Need a different gauge for a specific detail? Call (352) 432-3047 and we'll confirm what we can run.
Can you match aluminum trim to my panels?
Yes. We run your aluminum panels and trim from the same coil and color run, in matched gauge and Kynar/PVDF or SMP finish, so it reads as one roof. The visible white-on-white mismatch usually comes from ordering trim and panels separately — single-source them with us and that disappears.
What aluminum products can I order?
Standing seam panels (NS100 nail-fin and SL150 clip-fastened), drip edge and edge metal, coping and parapet caps, scuppers, and custom flashing — all in .032 aluminum, color-matched. Order panels and trim together for one run, one date and one color. Quote at orders@SuperbMetals.com or (352) 432-3047.
Need aluminum cut right, near you, this week?
.032 aluminum panels, trim and flashing — fabricated in Minneola, color-matched to your run, picked up or delivered across Central Florida.